If you turn off Windows Hello, you can still sign in with a password on a local account, or on a Microsoft account if the “Windows Hello only” setting is off. Some work or school PCs still require a PIN or Hello. Skip that check and you can lock yourself out of the sign-in screen, or lose your fallback after a reset. This guide shows the safest non-Hello option for each account type and what to do when Windows or policy makes Hello mandatory.
Windows Hello uses biometrics or a PIN instead of a traditional password. Microsoft also ties the PIN to the device where you set it up, and it says biometrics can include fingerprint, iris, or facial recognition. (Microsoft Learn)
Why does Windows Hello keep showing up?
Does Windows Hello use passkeys?
Not exactly. Windows Hello is the local sign-in system on the device, while passkeys are credentials used to sign in to supported apps and websites. Windows Hello can store or unlock passkeys, but a Hello PIN is not the same thing as a passkey, and a password is still a separate fallback when Windows allows it.
Best non-Hello sign-in path by account type
| Account type | Can skip Hello | Can remove PIN | Best fallback | Risk notes |
|---|---|---|---|---|
| Local | Usually yes | Usually yes | Password | Keep a strong local password set before removing the PIN. |
| Microsoft | Sometimes, if Hello-only sign-in is off | Sometimes, if the device allows it | Password, then a PIN if Windows insists | Turning off Hello-only sign-in can often bring password sign-in back, though some screens may still prompt for a PIN during setup or after changes. |
| Work/school | Sometimes no | Often no on managed devices | Use the sign-in method your organization allows | Windows Hello for Business is often the managed path on corporate devices, so policy may block password-only sign-in. |
Picture a home laptop with a local account and no fingerprint reader. The password path is the safest fallback, and you can usually remove the PIN from Settings > Accounts > Sign-in options without cutting off access.
Now take a work laptop tied to a school account, with the sign-in page asking for Hello setup again and again. That usually means the device is managed, so check the organization’s allowed methods instead of trying to force password-only sign-in.
What do you need before changing Windows Hello?
The safest setup starts with the right fallback already working. Before you remove Hello or change account settings, confirm that you know the password, can reach the lock screen, and can open Sign-in options. Work or school devices may need organization instructions instead of local changes.
- Your account password, especially for a Microsoft account or local account.
- Physical access to the PC.
- The lock screen sign-in page.
- Access to Settings > Accounts > Sign-in options.
- If this is a work or school device, access to your organization’s sign-in instructions or IT help.
How do you stop using Windows Hello?
The safest non-Hello path depends on the account type. Start by checking whether Windows already offers password sign-in at the lock screen, then turn off Hello-only sign-in where the system allows it, and only then remove a PIN. On managed devices, policy can override the local settings screen.
- Try the password option first. Press Windows key + L, then choose Sign-in options on the lock screen and select Password if it appears. That keeps access intact while you decide whether to keep or remove Hello.
- Turn off Hello-only sign-in. Go to Settings > Accounts > Sign-in options > Additional settings and switch off For improved security, only allow Windows Hello sign-in for Microsoft accounts on this device if that toggle appears. That setting is the line between password sign-in showing up again and Windows still pushing Hello.
- Remove the PIN if the device allows it. Open Settings > Accounts > Sign-in options > PIN (Windows Hello) and choose Remove. On many local and personal Microsoft-account PCs, that leaves password sign-in as the backup. On managed work devices, the button may be missing or blocked.
- Confirm the lock-screen path. Press Windows key + L again, open Sign-in options, and confirm that password sign-in appears before you depend on it. If password is gone and the device is personal, return to Settings > Accounts > Sign-in options and check the Hello-only toggle again.
- Escalate to your work policy. On a work or school PC, open Settings > Accounts > Access work or school and check whether the device is connected to an organization account. If it is, the sign-in method may be controlled by policy, and removing Hello from the local UI may not be allowed.
Can you keep using a password?
Yes, on many personal PCs you can keep password sign-in for a local account, and you can often keep it for a Microsoft account if the device does not force Hello-only sign-in. Work and school devices can be different because Windows Hello for Business may be the approved path, and policy can limit password-only use.
Local accounts are the easiest case
A local account usually keeps password access. If you want the lowest-friction non-Hello setup, leave the password in place and remove the PIN only after confirming that Sign-in options still offers Password. That avoids a dead end if a sensor fails later.
Microsoft accounts depend on one setting
For a Microsoft account, the key question is whether Windows is set to allow password sign-in on that device. If the Hello-only toggle is on, Windows may keep pushing PIN or biometric setup even though the account still has a password.
Work or school accounts can be policy-bound
Work and school sign-in is the hardest place to avoid Hello. Windows Hello for Business is the enterprise version of Windows Hello, and managed devices often require a PIN or another Hello method before the desktop fully unlocks.
Why does Windows keep asking for a PIN?
If Windows keeps asking for a PIN, the usual cause is not that your password disappeared. It is that the device is set to prefer Hello, or the account type is managed and the organization expects a device-bound sign-in path. The safest response is to keep the password ready, then remove or bypass the PIN only where the UI allows it.
- Open the lock-screen choices. Press Windows key + L, select Sign-in options, and look for Password. If it is there, use it instead of entering a PIN.
- Check the Hello-only toggle. Go to Settings > Accounts > Sign-in options > Additional settings and turn off the Microsoft-account-only Hello setting if it is available. That is the cleanest way to bring password sign-in back on a personal Microsoft-account PC.
- Remove the PIN after a reset. If the device was reset and Windows pushes Hello setup again, return to Settings > Accounts > Sign-in options > PIN (Windows Hello) and remove it only after confirming that password sign-in still appears on the lock screen.
If that did not work, the account is likely managed. In that case, check Settings > Accounts > Access work or school and look for the organization connection, then use the sign-in method required by policy.
What if your camera or fingerprint sensor fails?
If a biometric sensor stops working, the fallback is supposed to be the PIN or password, not another biometric. Microsoft says the PIN helps when the preferred biometric sensor is unavailable or not working properly, and face sign-in depends on a supported camera or sensor being available.
- Switch to another sign-in method. At the lock screen, select Sign-in options and choose Password or PIN if either is offered. This gets you in without waiting on the camera or fingerprint reader.
- Check the biometric path. Go to Settings > Accounts > Sign-in options and open the relevant biometric section, such as face or fingerprint. Re-add the method only if the sensor is detected and the device supports it.
- Fall back to password first. If face recognition fails because the camera input is unavailable, choose password sign-in rather than repeatedly retrying biometric setup. Repeated failures waste time and can leave you thinking the account is broken when the fallback is already available.
A common first-timer mistake is thinking face sign-in failure means the whole account is blocked. On a personal PC, the quicker move is usually Windows key + L, then Sign-in options, then Password.
What security details matter here?
Windows Hello is designed around device-bound sign-in, and Microsoft says it uses asymmetric key pairs for authentication while the TPM protects key material against attackers. Those details help explain why Hello can be favored over passwords on personal and managed devices, even when you prefer a simpler sign-in path.
Windows Hello facial recognition has also been reported as bypassed in a security report that used an infrared image. That is a narrow report, not a claim that every face sensor is unsafe, but it is another reason to keep a fallback method available.
What mistakes should you avoid?
The main errors are removing the fallback too soon, assuming every Microsoft account behaves the same, and trying to override policy on a managed device. If a biometric fails, use the password or PIN already available instead of repeatedly re-enrolling the same method. Keep the password working before changing Hello settings.
- Removing the PIN before checking password access. Confirm Sign-in options shows Password first.
- Assuming every Microsoft account behaves the same. The Hello-only toggle changes the result on personal devices.
- Trying to force a personal-device method onto a managed PC. Work and school devices can be policy-bound.
- Repeatedly re-enrolling face or fingerprint sign-in. If the sensor is unavailable, use the fallback instead.
- Forgetting to keep the password known. That matters if Windows Hello setup fails after a reset.
On personal PCs, the safest habit is simple: keep the password working, then change Hello settings only after you confirm the lock screen still offers a fallback. That avoids getting stuck with a device-bound sign-in method you did not want.
Frequently asked questions
What if I don't want to use Windows Hello?
Start at Settings > Accounts > Sign-in options. On a local account, leave the password in place and remove PIN (Windows Hello) only after checking that Sign-in options still shows Password. On a Microsoft account, also turn off the Hello-only setting if it appears.
Can I use a password instead of Windows Hello?
Yes, if your account and device allow it. Press Windows key + L, select Sign-in options, and choose Password. If Password is missing on a Microsoft account, go to Settings > Accounts > Sign-in options > Additional settings and disable the Hello-only option if it is available.
Why does Windows Hello keep asking me to set up a PIN?
Windows may keep asking for a PIN because the device expects a Hello fallback or because the account is managed. Check Settings > Accounts > Sign-in options first, then look for the Hello-only toggle and the PIN (Windows Hello) entry. On work devices, policy can override the local setting.
What if my biometric sensor is unavailable or not working properly?
Use the fallback path at the lock screen: Windows key + L, then Sign-in options, then Password or PIN. After that, open Settings > Accounts > Sign-in options and recheck the biometric section. Microsoft says the PIN is meant to help when the preferred biometric sensor is unavailable.
Why is Windows Hello not working?
First confirm that the device supports the method you are trying to use. For face sign-in, check that the camera or sensor is present; for fingerprint sign-in, verify that the reader is available under Settings > Accounts > Sign-in options. If it still fails, switch to password and review the account type.
How do I sign in without Windows Hello?
Use the lock screen path: Windows key + L, Sign-in options, then Password. If Password is missing, go to Settings > Accounts > Sign-in options and check whether a Microsoft-account Hello-only setting or a work policy is blocking it. Local accounts usually have the easiest fallback.