If an HP touchpad is missing from Device Manager, first show hidden devices and check BIOS/UEFI; if it still is not listed there, treat it as undetected hardware or a driver problem. A touchpad isn't working might be a result of a missing or out-of-date driver. This guide covers common HP recovery paths for hidden, disabled, and missing touchpads on Windows 10 and Windows 11.

What does a missing touchpad entry mean?

What does a missing touchpad entry mean?
Windows touchpad settings page with the touchpad toggle enabled

A touchpad can be missing because Windows hid it, disabled it, or never detected it at all. On HP laptops, the touchpad may still appear under Human Interface Devices or Mice and other pointing devices even when it is not obvious at first glance.

Is the touchpad hidden, disabled, or truly absent?

The distinction matters because each case has a different fix path. A disabled entry is still present and can usually be re-enabled in Device Manager. A hidden entry may only show after you reveal hidden devices. If the touchpad never appears in either place, move on to BIOS and driver checks.

  1. Open Device Manager and check whether the touchpad is present but greyed out.
  2. Use View > Show hidden devices to reveal ghosted hardware entries.
  3. If nothing appears in the normal device trees, move on to BIOS and driver checks.

Why is my touchpad not showing up?

Most often, the touchpad is turned off by a function key or Windows setting, or its driver is missing or out of date after a Windows or HP update. Less commonly, BIOS settings can keep Windows from seeing the device at all. On HP systems, that means you need to check both Windows and the firmware path.

Could a function key or Windows setting have turned it off?

Yes. Some HP laptops use Fn plus a function key to toggle the touchpad, while Windows can also suppress touchpad input through its settings. Another common possibility is that the touchpad was disabled in Settings.

  1. Press Fn plus the touchpad toggle key, if your HP model has one.
  2. Open the Windows touchpad settings page and make sure touchpad input is turned on.
  3. Restart the laptop after changing the setting.

Did a Windows or HP update remove the driver?

Updating or reinstalling the touchpad drivers might help solve the problem. If the touchpad entry disappeared right after an update, the driver may need to be reloaded or replaced.

  1. Run Settings > Windows Update and install every available update.
  2. Return to Device Manager and check whether the touchpad reappears.
  3. If it is still broken, update or reinstall the device from Device Manager.
  4. Use the exact HP model support page or HP Support Assistant for chipset, Serial IO, and touchpad packages.

Does BIOS or firmware disable the internal pointing device?

Yes. Some HP BIOS setups include an internal pointing device or touchpad switch, and if that setting is off, Windows may not list the hardware at all. The HP startup path is straightforward: press Esc at power-on for Startup Menu, then F10 for BIOS Setup. If the setting is missing there too, that points away from Windows and toward service-level diagnostics.

  1. Power off the laptop, then turn it on and repeatedly tap Esc.
  2. Press F10 to enter BIOS Setup.
  3. Look for touchpad, internal pointing device, or similar input options.
  4. Enable the option, save changes, and exit.

How do I check for a hidden or disabled device?

If the touchpad is still in Windows, Device Manager can often reveal it. Show hidden devices first, because a disabled or ghosted touchpad may not appear in the default view.

  1. Open Device Manager. Press Win+X, then choose Device Manager. This gives you the full hardware tree rather than the simplified Settings view.
  2. Show hidden devices. In Device Manager, open View and select Show hidden devices. Hidden entries can reveal a disabled or ghosted touchpad that normal view skips.
  3. Check both categories. Expand Human Interface Devices and Mice and other pointing devices. On some HP systems, the touchpad appears in only one of these sections.
  4. Enable the device. If the touchpad is greyed out or marked disabled, right-click it and choose Enable device. That restores the driver without a reinstall.

If the pointer still never appears, continue to the driver path. A hidden entry can look like a dead device when it is really only disabled, so checking the full tree first avoids unnecessary reinstalls.

How do I update or reinstall the touchpad driver?

Microsoft recommends Windows Update first, then Device Manager if Windows does not offer a fix. On HP laptops, the model-specific support page or HP Support Assistant is the next step because generic packages can miss the right input stack. This path is especially useful when the touchpad disappeared after a Windows or HP update. (Microsoft Support)

  1. Run Windows Update. Go to Settings > Windows Update and install every available update, then restart.
  2. Update from Device Manager. Right-click the touchpad entry, open Properties > Driver, then choose Update driver. If Windows finds a newer package, let it finish and restart.
  3. Reinstall the device. If updating does not help, choose Uninstall device. If the box appears, check Delete the driver software for this device, then restart so Windows can reload the driver stack.
  4. Check HP drivers next. Open the exact model page on the HP support website, or launch HP Support Assistant and check for touchpad, chipset, and Serial IO updates. Use the model page for the laptop family, not a nearby model.

How do I tell whether the touchpad is disabled by a function key or settings?

How do I tell whether the touchpad is disabled by a function key or settings?
A laptop keyboard and touchpad on a wooden desk

Start with the hardware toggle, then check Windows touchpad settings. Some HP laptops use top-row keys to disable input, and Windows can also turn the touchpad off in settings. These checks matter because they can turn the touchpad off without removing the hardware entry.

  1. Try the HP hotkey. Press and hold Fn, then press the touchpad toggle key in the top row. On many HP laptops the key varies, and some models use no dedicated touchpad key at all.
  2. Check Windows touchpad settings. Open Settings > Bluetooth & devices > Touchpad on Windows 11, or Settings > Devices > Touchpad on Windows 10 if available. Make sure touchpad input is on.
  3. Review mouse behavior. In the same touchpad page, look for the option that leaves the touchpad on when a mouse is connected.
  4. Reboot once. Restart the laptop after changing the setting. A reboot clears temporary input state that can keep the touchpad suppressed.

If the touchpad starts working after Fn plus the function key, but Device Manager never changed, that points to a toggle or Windows setting rather than a missing device.

How do I check HP BIOS settings?

If the touchpad is still absent after Windows checks, BIOS can be the last place that hides it. HP uses a simple startup path: press Esc at power-on to reach Startup Menu, then press F10 for BIOS Setup. If the internal pointing device is absent or disabled there, more driver reinstalls are unlikely to help. (HP Support)

  1. Enter Startup Menu. Shut down the laptop, then power it on and repeatedly tap Esc. That opens the HP Startup Menu before Windows loads.
  2. Open BIOS Setup. Press F10 from Startup Menu. Use the keyboard if the touchpad is unavailable.
  3. Find pointing-device options. Look for touchpad, internal pointing device, or similar entries, then make sure they are enabled. Save changes and exit.
  4. Use keyboard navigation. If both touchpad and mouse fail, move with arrow keys, Tab, and Enter. That keeps you from getting stuck before the setting is fixed.

What does the touchpad recovery table show?

symptom most likely cause next action
touchpad listed but disabled Device entry is present, but Windows has it turned off Device Manager > right-click the device > Enable device
touchpad under hidden devices Windows still has the device, but it is hidden or ghosted Device Manager > View > Show hidden devices, then enable it
touchpad missing after update Driver regression or broken touchpad driver stack Run Windows Update, then reinstall the device from Device Manager
external mouse disabling touchpad The touchpad setting may be turned off or configured to stay off when a mouse is connected Settings > Bluetooth & devices > Touchpad, then review the touchpad options
missing in BIOS as well BIOS has the internal pointing device turned off, or hardware is undetected HP Startup Menu with Esc, then BIOS Setup with F10, then contact HP support

What should I do if it still does not work?

What should I do if it still does not work?
A laptop keyboard and touchpad are shown in close-up

If the touchpad still does not appear after Device Manager, Windows Update, and BIOS checks, move to model-specific HP drivers and firmware. The strongest signal is a touchpad that is missing in BIOS too, because that usually means more than a simple Windows driver problem. At that point, HP support is the right escalation path. (HP Support)

  1. Check for unknown devices. In Device Manager, look for Unknown device or warning icons under input, system, or controller categories. Those entries often point to the missing link in the touchpad chain.
  2. Install HP-specific packages. Use the exact HP model support page or HP Support Assistant to pull touchpad, chipset, and Serial IO drivers. Generic Windows drivers can leave the touchpad unusable on some HP systems.
  3. Escalate to HP support. If BIOS shows no internal pointing device and Windows still cannot detect it, the next step is manufacturer support.

Keep Windows Update current after recovery, and return to the HP model page if the touchpad stack changes after a system update. That reduces repeat driver loss after a reinstall and helps keep the recovery path short the next time the device goes missing.

Keep reading

Frequently asked questions

Why is my touchpad not showing up in Device Manager?

Most often, the touchpad is disabled by a hotkey or Windows setting, or its driver is missing or out of date. If it still does not appear after hidden devices are shown, check HP BIOS with Esc then F10, because a BIOS setting can keep Windows from seeing it.

How do I find a hidden touchpad in Device Manager on an HP laptop?

Open Device Manager with Win+X, then choose View > Show hidden devices. Expand Human Interface Devices and Mice and other pointing devices. If the touchpad appears greyed out, right-click it and choose Enable device.

Should the touchpad appear under Human Interface Devices or Mice and other pointing devices?

Either location can be correct. Check both trees before assuming the hardware is missing.

Can Windows Update reinstall a missing touchpad driver?

Yes. Use Settings > Windows Update first, then reinstall the device from Device Manager if needed.

What should I do if updating the touchpad driver does not help?

Reinstall the device from Device Manager > Driver > Uninstall device, then restart. If that fails, use the exact HP model support page or HP Support Assistant to install chipset and Serial IO drivers. If BIOS still does not show the device, escalate to HP support.

Could a BIOS setting hide the touchpad from Device Manager?

Yes. On some HP laptops, BIOS can disable the internal pointing device, which prevents Windows from listing it. Enter BIOS with Esc at startup, then F10, and look for touchpad or internal pointing device settings before you assume the driver is the only problem.