A recent Microsoft Defender update can cause Quick Scan and Full Scan to crash shortly after they start. On affected systems, versions v1.1.26070.7 and v1.1.26080.2 of Defender are said to be used with Microsoft Security Intelligence Update versions 1.457.222.0, 1.457.225.0, 1.457.226.0, 1.457.227.0, and 1.457.230.0. This guide shows how to check whether the scan is still active and which fix to try next.

What a stuck quick scan means

What a stuck quick scan means
Windows security screen shows a loading spinner and status message

A quick scan should check common malware locations first and usually finish faster than a full scan. If Windows Security shows no progress, the scan control does not respond, or Microsoft Defender Antivirus keeps running without finishing, the scan may be hung.

On Windows 11, the scan controls and status live inside the Windows Security app. On Windows 10 and Windows 11, the navigation and protection pages can appear in slightly different places, but the scan engine is still Microsoft Defender Antivirus. If the UI looks wrong, the app itself may need repair.

Likely causes, ranked

  • Another scan is already running. A scheduled scan, full scan, or overlapping manual scan can make Quick scan look stuck when it is queued or waiting.
  • Microsoft Defender is hung. The scan engine or its service state can stop scans from starting, continuing, or finishing.
  • A security update is broken. Some Defender builds tied to Microsoft Security Intelligence updates have been reported by windowscentral.com to crash during Quick Scan or Full Scan.
  • The Windows Security app is damaged. The app can fail to show scan status correctly even when the engine is partly working.
  • Another antivirus is interfering. Third-party security software can block, duplicate, or fight with Defender.

If Quick scan reaches a percentage and then sits there with little or no disk activity, that points more to a hang or queue problem than to a normal long scan. If the percentage keeps changing and the drive stays active, the scan may still be working.

Windows Security quick scan troubleshooting matrix

Windows Security quick scan troubleshooting matrix
A laptop displays a Windows security scan screen beside a mug and stacked books
Symptom What it usually means How to verify it Next fix
Frozen percentage The scan may be hung, blocked by another scan, or waiting on Defender Open Task Manager and look for MsMpEng.exe activity; if CPU and disk stay near zero for an extended period, it is likely stalled Stop the scan, then restart Microsoft Defender Antivirus service and run Windows Security repair steps
Endless scanning The scan is still moving through many files, or a bad update is looping the engine Check whether the percentage changes every few minutes and whether disk activity remains present Run a full scan from Windows Security later if needed, then check for the Defender update issue and apply the listed security-intelligence fix
Scan stops The Defender engine or a conflicting security app is cutting the scan short Open Windows Security and confirm whether another antivirus is installed and active Temporarily disable or uninstall the conflicting security app, then retry the scan
No scan option The Windows Security app or Defender UI is damaged Check whether Virus & threat protection opens normally in Windows Security on Windows 10 or Windows 11 Repair or reset the Windows Security app, then restart the Defender service
Overlapping scans A scheduled scan, quick scan, or full scan is already in progress Look for a scan status line in Windows Security and check whether a second scan was started before the first finished Let the existing scan finish, then run only one scan at a time

Is the scan still running or frozen?

If the percentage still changes, the scan is probably active. If it stays at one value with no disk or CPU activity for an extended period, treat it as frozen. A scheduled scan can also look quiet because it uses lower CPU, so activity matters more than the number alone.

  1. Check Defender activity. Open Task Manager and look for MsMpEng.exe. If CPU and disk are moving, Defender is still doing work. If both stay flat for a long stretch, the scan is likely hung.
  2. Compare manual and scheduled behavior. In Windows Security, confirm whether a manual quick scan is running or whether a background scan started earlier. Scheduled scans can move slowly by design, especially if the CPU usage limit is low.
  3. Try one full scan later. If the quick scan still appears active but never ends, stop the current scan first, then run a full scan from Windows Security > Virus & threat protection > Scan options and choose Full scan later. A full scan checks every file on the drive, so it takes longer by design.

If Windows 11 shows 0% for a long time after you start a scan, but Task Manager still shows MsMpEng.exe using CPU, the engine may still be working while the UI lags. If the percentage stays flat and activity vanishes, the scan is more likely stuck.

How do you stop a quick scan that will not stop?

Use the stop control in Windows Security first. If that fails, restart the Defender service and reopen the app. That is the safest way to end a scan that keeps running or refuses to close without jumping straight to a reset.

  1. Stop the scan in Windows Security. Open Windows Security > Virus & threat protection and choose the scan control if it is available. On Windows 11, the scan buttons are usually easier to spot on the main protection page; on Windows 10, they may sit in a slightly different section of the same page.
  2. Restart Defender services. Open services.msc, find the Microsoft Defender Antivirus service entry, and restart it if the option is available. If Restart is unavailable, use Stop and then Start, or restart the PC and try again. This clears a hung scan state without touching your files.
  3. Restart the PC. If the scan still hangs after the service restart, reboot Windows and check the scan status again before starting another scan.

Windows Security app repair steps

If the app is broken, the scan status can be wrong even when the engine is not completely dead. This is where Windows Security repair matters. Windows 10 and Windows 11 both can repair or reset the app, but the exact menu path differs.

  1. Open app settings. On Windows 11, go to Settings > Apps > Installed apps > Windows Security > Advanced options. On Windows 10, use Settings > Apps > Apps & features > Windows Security > Advanced options if available.
  2. Repair the app first. Select Repair. This keeps app data in place and is the least disruptive fix when scan controls or status text look wrong.
  3. Reset only if needed. If Repair does not help, select Reset. Use this when the UI is broken or the app will not open scan pages correctly.
  4. Update Security Intelligence. Open Windows Security or Windows Update and check for updates. If the latest version appears, install it. Performing an upgrade to Security Intelligence Update v1.457.236.0 reportedly resolves the issue, and checking in either place should surface the update (reported by windowscentral.com).
  5. Reopen and retest. Start a new quick scan after the app repair or update check. If the scan now completes, the issue was likely a bad app state or a problematic intelligence update.

Could another antivirus be blocking Defender?

Yes. Third-party antivirus software can conflict with Microsoft Defender Antivirus, which sits behind Windows Security. That conflict can stop scans, duplicate scans, or keep Defender from finishing. If another security suite is installed, check whether its real-time protection is on.

  1. Check installed security apps. Open Settings > Apps and look for any antivirus or endpoint protection product other than Windows Security.
  2. Disable or uninstall it. Turn off its real-time protection first if the app allows it. If the scan starts working after that, the conflict is the likely cause.
  3. Run a clean test scan. Launch one quick scan from Windows Security only. If it completes normally, leave only one real-time antivirus active unless your organization requires otherwise.

Why does my quick scan keep scanning?

A quick scan can keep moving for a long time if it is checking a large number of common infection points, waiting behind another scan, or running under a background scheduled task. It can also look endless when the interface is lagging while the engine still works.

For a normal run, watch for movement in the percentage, disk activity, or a changing status line. If all three stop for a long stretch, treat it as a hang and move to the stop-and-repair steps above. A full scan always takes longer because it checks every file on the drive.

Why does windows security quick scan take forever?

A quick scan should be faster than a full scan, but it can still feel slow when Microsoft Defender is scanning many standard malware locations, when scheduled scan settings limit CPU use, or when another security product is already active. If the bar moves, the scan may be normal, just slow.

Check whether the scan was started manually or by a background task. If you want deeper coverage, switch to a full scan overnight from Windows Security > Virus & threat protection > Scan options instead of letting a slow quick scan run indefinitely.

Why does windows security scan stop or freeze?

When a scan stops or freezes, the cause is usually a Defender engine problem, a conflicting antivirus app, or a bad security-intelligence update. A stuck UI can also make a live scan look dead. The fastest fix is to stop the scan, restart the Defender service, and check for the latest protection update.

On Windows 10, the service and app repair paths may sit in slightly different places than on Windows 11, but the recovery order is the same: stop the scan, repair Windows Security, then update Defender before trying again. If another antivirus is installed, check that first because it can block the scan before any update helps.

Still not working?

Still not working?
Windows Security settings window appears beside bold troubleshooting text

If the scan still will not stop or restart after app repair, service restart, and the security-intelligence update check, perform a clean boot and run another scan with only Microsoft services active. To do that, open msconfig, choose Selective startup, clear Load startup items, and on the Services tab hide Microsoft services and disable the remaining non-Microsoft services, then restart the PC. That tells you whether a startup app or security suite is interfering. If the problem remains after that, contact Microsoft Support or the device vendor, because the issue may sit in the Defender installation or a system component outside Windows Security.

A common mistake is to keep starting new scans while the old one is still stuck. That can create more overlap, not less. Let one scan finish, stop, or be cleared before starting another.

Keep reading

Frequently asked questions

Why is quick scan not working?

The usual causes are a frozen Defender engine, a conflicting antivirus app, or a broken Microsoft Security Intelligence update. Start with Windows Security > Virus & threat protection, then check for updates and restart the Microsoft Defender Antivirus service if the scan will not launch or complete.

Why won't quick scan work

If Quick scan refuses to start, check whether another scan is already active and whether a third-party security app is installed. Then repair Windows Security through Settings > Apps > Windows Security > Advanced options and retry the scan after a restart.

How do I know if quick scan is actually still running?

Look for changing percentage, disk activity, or CPU use from MsMpEng.exe in Task Manager. If those stay active, Defender is probably still scanning. If they stay flat for an extended period, move to the stop-and-repair steps.

Why does my quick scan keep scanning: it may be working through?

It may be working through many common malware locations, waiting behind another scan, or running under a scheduled background task. If the bar still moves, let it continue. If the display sits unchanged with no activity, stop the scan and restart Defender before trying again.

Why is my windows security quick scan stuck?

A stuck scan usually points to a Defender service problem, a bad security-intelligence update, or overlap with another scan. Stop it in Windows Security, restart the Microsoft Defender Antivirus service, and check for the latest protection update. If that fails, repair the app.

What should I do if quick scan won't stop?

Use the stop control in Windows Security first. If it still runs, restart the Microsoft Defender Antivirus service, then reboot the PC. If the scan keeps returning, repair Windows Security and check for another antivirus that may be blocking Defender.